Game Console & Electronics Refurbishing Kit

Game Console & Electronics Refurbishing Kit

If you aren’t worried about voiding the warranty on your game console, you can get in there and fix it yourself with this Game Console & Electronics Refurbishing Kit.

This kit is designed for game consoles, PCs and laptops and it will work with the Xbox One, PS4, Wii, and many others. Because you can’t just use a regular screwdriver. Those console designers make it so you need special tools. These are the tools that you need.

Game Console & Electronics Refurbishing Kit

  • Ultimate Gaming Console Repair Kit gives you both opening and cleaning tools
  • Works with
    • Xbox One (also Xbox 360)
    • PlayStation 4 (also PS Vita, PS3, PSP, PS2, and the original PlayStation)
    • Wii U (also Wii)
    • Nintendo 3DS (also DSi, DS Lite, and the Nintendo DS)
    • Dreamcast
    • Game Boy Advance SP (also Game Boy Advance, Game Boy Cartridges)
  • Includes:
    • 26 Bit Driver Kit
      • 4 mm Driver Handle – rubberized for a sturdy grip and magnetized to hold bits and screws
      • 60 mm Driver Extension – increase your reach into smaller devices
      • Metal Tweezers – grab hold of small screws and components
      • 26 bits in the following sizes:
        • Flathead sizes 1.5, 2, 2.5, 3 mm
        • Phillips sizes #000, #00, #0, #1, #2
        • Torx sizes T4, T5, T6
        • Torx Security sizes TR7, TR8, TR9, TR10, TR15, TR20 (compatible with non-security)
        • Hex sizes 1.5, 2, 2.5, 3, 4 mm
        • Tri-wing sizes #0, #1
        • Spanner size U3.0
    • Anti-Static Wrist Strap
    • Dust Blower
    • ESD-safe Tweezers (electrostatic damage)
    • Plastic Spudger
    • Metal Spudger Set
    • Xbox 360 Opening Tool
    • Cleaning Swabs
    • Plastic Opening Tools
    • Surface Detailing Block
    • German Detailing Eraser with Brush
    • Pencil Sharpener
    • Small ESD-safe Brush (electrostatic damage)
    • Large ESD-safe Brush (electrostatic damage)
    • 1/4″ Driver Handle
      • Phillips #2
      • Flathead 6 mm
      • Game Bit 4.5 mm (Nintendo Nut Setter #6)
      • Game Bit 3.8 mm (Nintendo Nut Setter #8)
    • Custom carrying case
  • Dimensions: 16 1/2″ wide x 13″ tall x 4″ deep
  • Weight: 3 1/2 lbs.
  • Note: It may look like you’ve lost some tools when you open the case. The tweezers in particular tend to fall behind the foam on the opposite side, so check there first

Only $99.99 from ThinkGeek.com. Do it yourself. I believe in you.

1 Comment

Leave a Reply to Staldan Cancel reply

Your email address is optional. If provided it will not be published or shared.


*