This clone trooper captain helmet is a 1:1 scale replica created by the relatively new Star Wars prop replica company, eFX. The helmet features a LED reflector at the back and “slight weathering”, just as it appears in Attack of the Clones film from 2002.

Far superior to the battle droid armies of the era, clone troopers formed the backbone of the Republic’s military initiative against the Separatist forces, so much so that the wars they fought in came to be named after them. The Clone Captains were easily distinguishable on the battlefield by their distinctive red helmet and armor deco.

Product Specifications:

• Exclusive red Clone Captain deco with “slight weathering”
• Worldwide Edition: 400
• Fiberglass Construction
• See through visor with mirrored lens
• Fully Padded interior
• LED reflector on back of the “Mohawk” that requires two AAA batteries (not included)
• Numbered Plaque
• eFX Display Stand
• Certificate of Authenticity

The Exclusive Attack of the Clones Clone Captain Helmet with Slight Weathering Prop Replica is available from the official Star Wars Shop for $429.99.

Did you think the Darth Vader Statue was weird? That’s nothing compared to these two Christmas inspired Star Wars droids that the guys over at Walyou stumbled upon.

This collectible was inspired by the 1980’s Lucasfilm holiday greeting card art by Ralph McQuarrie, the concept artist responsible for much of the look of the original Star Wars trilogy. The set comes with a display base and includes a full-sized holiday greeting card.

You can get the “Star Wars Holiday Edition R2-D2 and C-3PO” from Amazon for $30.85 or over at eBay with the “buy it now” price set to $33.50.

The new Batman film “The Dark Knight” opens next month and soon you will be able to get your hands on these cool looking scale 1:6 figures.

These plastic collectibles are offered in two versions; the Batmobile and the Batpod. Both features movable parts and headlights that light up.

The Batmobile and the Batpod scale 1:6 figures will be available during Q4 2008 from the Hot Toys website. No word on pricing yet.

(Via Likecool)

This nice looking radio-controlled mini car is a perfect scale 1:43 model of the Mini Cooper S Convertible that was introduced by BMW at the Geneva Motor Show in 2005.

Features:

• Full function radio control series
• Full Function Remote Controller (6 Ways Controls)
• Fast Charging Station (3 Minutes Fast Charging)
• 2 Speeds
• HxWxD(approx.): 80mm x 108mm x 175mm
• Required 6 AA batteries (not included)

The Collector Series: Rechargeable Desktop R/C Mini Cooper S Convertible is available in red or yellow for $25.90 from Toys Brando.

If the 7-Foot Battlestar Galactica Cylon Figure wasn’t enough to satisfy your sci-fi collectibles needs, here are three more cool characters to choose from.

R2-D2 & C-3PO
Both figures will include light and sound function, for the most ‘real’ experience possible. Details on the sound and light function will be made available in future updates on SideshowCollectibles.com.

Alien
Stands 7 feet 7 inches. Resin and Rigid Foam Head. Transparent Dental Acrylic Lips. Vacu-Form Dome. Steel Armature, Armature Wire in Tail to pose. Wood Base (4×2 feet) Heal Pins into Steel Bracket. Latex and Polyfoam Body & Tail.

The R2-D2 ($5,450) and C-3PO ($5,950) figures from Sideshow Collectibles are due to be released sometime during the third quarter 2008, and for the Alien ($5,200) over at MonsterGalaxy it says “contact us for availability”.

(Via Gizmodo, Likecool, OhGizmo & TheForce.net)

Fans of the Star Trek sci-fi series will soon be able to get their hands on this cool collectible Tricorder, the handheld device used for scanning an area.

Made from the original pattern used to create the props, this replica is made of die-cast metal and plastic to give you that perfect artifact from the future that you so crave. Limited edition of 2,000 pieces, includes display case and certificate of authenticity.

The Star Trek Mark IX Science Tricorder Replica ($349.99) is estimated to arrive in October 2008 over at Entertainment Earth.

Fans of the Battlestar Galactica Sci-Fi series can now get their hands on a hand-made 7-foot Cylon replica – if you have about $8,000 to spare, that is.

The Life-size Cylon figure, as seen in the reimagined Sci-Fi series ‘Battlestar Galactica’, is manufactured exclusively by Fred Barton Productions, Inc. of Los Angeles, California, and licensed through Universal Studios. Each Cylon is hand-made using only the finest materials and overseen by the ‘Robot Man’ himself, Fred Barton.

This outstanding 7-foot replica features both the haunting visor lights of the robotic soldier synchronized to the menacing, eerie hum of the Cylon Centurion. It is sure to impress not only fellow fans of the epic ‘Battlestar Galactica’saga, but those who are just encountering the stunning Cylon robot for the first time.

Features:

• 100% fiberglass body
• CGI based
• Hammered Duo-Tone Finish
• Advanced Electronics
• Synchronized Stereo
• Red LED light effects in visor

The Cylon Life-Size Figure ($7,900) is available from Sideshow Collectibles.

(Via Born Rich, Product Reviews Net, SlashGear & The Green Head)

Ok, the Star Trek Enterprise Telephone will let you communicate for real, but who cares about such trivialities when you can get a communicator like this.

With sound effects and clips from the groundbreaking sci-fi series, each of these limited edition collectibles features a pop-open design and deluxe window-box packaging. This exclusive lifesize communicator has a glossy paint base and vac-metal shield.

Along with beeping sounds, there are 9 different voice phrases:

• Enterprise, this is Kirk. (Captain Kirk)
• Spock here, Captain. (Spock)
• Bridge here, Captain.
• Transporter room ready to beam up.
• Bridge, this is the captain. (Captain Kirk)
• Enterprise to Mr. Spock.
• Captain, shall I beam down an armed party? (Spock)
• Scotty here, Captain. (Scotty)
• Your signal is very weak; can you turn up your gain? (Spock)

The EE Exclusive Star Trek Original Series Communicator Replica ($29.99) is estimated to arrive over at Entertainment Earth in March 2008.

(Via Chip Chick)

Remember the “Back to the Future” movie from the 80s, starring Michael J Fox? If you do, then you probably remember flux capacitor as well.

This little device is the most important part in the De Lorean time machine car. It’s is described by Doc Brown as “what makes time travel possible”.

Now you can get a unique replica of this piece of movie history.

Reproduced with full light effects and adjustable power settings, the Flux Capacitor replica recreates the 1.21 jigowatt-controlling heart of the De Lorean time machine. Measuring over sixteen inches tall and twelve inches wide, each replica features hand-numbering with a matching box, Certificate of Authenticity and Care Instructions!

The Back To The Future Flux Capacitor Replica ($220) is available at tfaw.com.

(Via Mike Ballan)

It doesn’t happen often, but every now and then this golden protocol droid steels the show from R2-D2, Darth Vader and other Star Wars celebs.

The C-3PO collectible doll is 21 cm (8.26 inches) tall and made of soft vinyl. It can be pre-ordered for $58 and will start shipping in February 2009(?!).

Surely they must mean February 2008, or?

(Via NCSX)

This 18-inch Michael Myers figure ($50) features a motion-activated sensor that will trigger the theme song from the Halloween movie.

(Via Gearlog)

A summary of three Star Wars related news from the last couple of days:

LEGO’s Ultimate Collectors Millennium Falcon Unboxed
Remember that Millennium Falcon LEGO set we covered a month ago? Gizmodo has a series of pictures from the unboxing ceremony.

LEGO’s Ultimate Collectors Motorized Walking AT-AT
From the same collectors series comes this cool All-Terrain Armored Transport LEGO piece. Available for $130 at the official LEGO store.

Behold the power of the Empire! For the first time ever, the ultimate Motorized Walking AT-AT is ready to crush the Rebel Alliance at your command. Thanks to the new Power Functions System, the mighty All-Terrain Armored Transport really walks forward or backward into battle!

• Features an opening cockpit and rotating laser cannons!
• Motorized Walking AT-AT really walks and its head moves up and down!
• Handle on top allows for easy transport!
• Stands over 12″ (30 cm) tall and over 14″ (36 cm) long!
• Includes AT-AT Pilot, General Veers, Snowtrooper and Luke Skywalker with grappling line and lightsaber!
• Includes battery box and motor!
• Requires 6 AA (1.5V) batteries, not included.

(Via Boing Boing Gadgets)

Update
Here’s a video clip of the walking LEGO AT-AT in action:

(Via Neatorama)

Yoda vs. Palpatine ARTFX Statue
Last but not least we have this amazing ARTFX statue, standing almost 11 inches tall. Available for pre-order at the official Star Wars shop. The product starts shipping March 2008 and costs $175.

This gigantic ARTFX Statue measures over 15 inches long, and almost 11 inches tall (1/7th scale), with both of the figures being independent of the base, allowing you to position the characters as you like within the Senate diorama base. The Force Lightning is cast in a dynamic, translucent material, and is also removable (via optional hands) for a variety of posing options. Spectacularly detailed, from the wrinkles on the future Emperor’s face, to the texture pattern on Yoda’s robe, this piece stands as a fitting monument to two of the most powerful wielders of the Force.

With its large scale and impeccable paint applications, this ARTFX Statue is a snap-fit kit that can be easily put together in seconds without glue or modeling skill. Kotobukiya’s ARTFX Series continues to produce some of the best Star Wars collectibles in the galaxy.

(Via Uber-Review)

The Star Wars Lightsaber: Darth Vader Force FX Collectible ($190) is an official replica of Darth Vader’s Lightsaber from Star Wars: Episode IV – A New Hope.

It has has a realistic metal hilt, a glowing red blade with power up and power down feature, and authentic sounds which have been digitally recorded from the movie and is officially licensed.

Here’s something for those hard-core Potter fans. The Harry Potters Light Up Wand ($61) will light up when you wave it. Wave again and the light goes off.

It is an exact replica of Harry’s own wand right down to the very last detail. Harry Potter’s Light up Wand comes with an authentic copy of the original Ollivander’s wan box as featured in the film Harry Potter and the Sorcerer’s Stone. The wand is a magical 14 inches and is made of highest quality wood and resin. The Harry Potter Light up Wand is an official collectors item manufactured by The Noble Collection and authorized by Warner Bros, so you know when you buy your Harry Potter wand from thedoghouse.co.uk, you’ll be getting the next best thing to Harry’s own! Go on; bring out the wizard in you! Requires two AAA batteries, not included.

(Via Prylfeber)

Four different scaled Master Replica lightsabers ($37), with official licence from Lucas Film Ltd, have just arrived over at Gadgets.dk.

These collectible items are made in approx. half of the original size (0.45% to be precise). Choose between Anakin Skywalker, Darth Vader, Obi-Wan Kenobi and Yoda – all “modeled and molded in superb detail after the sabers as they appear in Star Wars: Episode III – Revenge of the Sith.

Your 0.45 scaled lightsaber comes in a quality presentation box with the prop story imprinted on the inside cover. It also includes a display stand complete with Star Wars logo and character name for optimal presentation in your Star Wars collection.

Product specifications

• Superb detailing to match the acclaimed 1:1 scale Limited Edition Collectible Lightsabers.
• Machined and die cast metal and injection molded components.
• Collectible quality presentation box with the prop story imprinted on the inside cover.
• Each replica is accompanied by a Certificate of Authenticity.
• Display stand complete with Star Wars logo and character name.